KALPOXY® 565 Coating

100% Solids High Build Reinforced Chemical Resistant Epoxy Coating

KALPOXY® 565 is based on a unique blend of epoxy polymer and aliphatic polyamine curing agents formulated for extreme chemical resistance with an unusual degree of surface tolerance. The formulation is solvent-free to ensure safety and maximum technical performance. Kevlar®* microfibers are incorporated for reinforcement and viscosity management to achieve high application rates. The formulation is uniquely field-friendly, non-hazmat and supplied in the most preferred 1/1 by volume mixing ratio. For further technical information click the printer friendly pdf link.

  • Chemical Resistant Coating - In harsh chemical service such as piping, tank internals, clarifiers, wastewater treatment concrete and steel surfaces, brine tanks.
  • Anti-corrosive Coating - General service in aggressive exposures including high abrasion.
  • Encapsulating Coating - Smooth, dense, easily decontaminated coating for steel and concrete.

*Kevlar is a trademark of E.I. DuPont de Nemours Co.


  • Filter Slurry Tanks
  • Air Receiver Tanks
  • Thickener Tanks
  • Launders
  • Structural Steel
  • Concrete Restoration
  • Secondary Containment
  • Concrete Pillar Rebuild & Restoration


  • 100% Solids “O” VOC’s
  • Surface Tolerant Bonding
  • Displaces Moisture
  • Cures Under Water
  • Fast Cure
  • High Build up to 250 Mils
  • Trained Service Team
  • Low Coefficient of Friction (eliminates build up)